1680 North Main Street
Orange, CA 92867
Phone: (714) 283-2032
New clients receive
10% discount on first
sample submission
The following table lists our Geonet testing. These tests will provide information on the capabilities of Geonet materials. A more detailed discussion of these tests may be found at Geo Testing.
Test | Test Method | No. Specimens | Amt. Needed |
---|---|---|---|
CBR Puncture Resistance | GRI GS. | 5 | 12" x 48"+ |
Compression Behavior | GRI GN. | 5 | 8" x 48"+ |
Density (g/cm3) | ASTM D 792(A) | 3 | 6 sq. in. |
Moisture Content % | ASTM D 4643 | 2 | 12 sq. in. |
Moisture Content | CRT Method | 2 | 12 sq. in. |
Mass per Unit Area | ASTM D 3776 | 5 | 2 sq. ft. |
Strip Tensile Strength (MD) | ASTM D 5035 | 5 | 12" x 12"+ |
Strip Tensile Strength (Transv.) | ASTM D 5035 | 5 | 12" x 12"+ |
Transmissivity (single load) | ASTM D 4716 | 1 | 18" x 18" |
Transmissivity (mult load + gradient) | ASTM D 4716 | 1 | 24" x 24" |
Transmissivity (common loads per spec.) | ASTM D 4716 | 1 | 60" x 60" |
Ply Adhesion | ASTM F 904 | 5 | 24 sq. in. |
Should you need additional information about CRT Laboratories' testing capabilities please contact us via our RFQ Form or call us at (714) 283-2032.